{"id":124,"date":"2019-08-20T15:34:03","date_gmt":"2019-08-20T15:34:03","guid":{"rendered":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/?page_id=124"},"modified":"2021-11-09T14:19:19","modified_gmt":"2021-11-09T14:19:19","slug":"submitting-files-for-rapid-prototyping","status":"publish","type":"page","link":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/model-shop\/submitting-files-for-rapid-prototyping\/","title":{"rendered":"File Preparation for Rapid Prototyping"},"content":{"rendered":"\n<h2 class=\"wp-block-heading\"> FORM INSTRUCTIONS:<\/h2>\n\n\n\n<ol class=\"wp-block-list\"><li>Download the latest &#8220;<a href=\"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-content\/uploads\/sites\/27\/2019\/08\/2022-3-10-AF-Student-RP-Request-Form-Fall2022.xls\">Student RP Request Form<\/a>&#8220;. This form has two sheets the 1st sheet <g class=\"gr_ gr_26 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling multiReplace\" id=\"26\" data-gr-id=\"26\">labeled<\/g> \u201cStudent Request\u201d is for each student to complete <strong>(Do not fill out the second Page \u201cCCS Staff Only\u201d, this is for internal use only.)<\/strong><\/li><li>Fill out course and contact information. List each <g class=\"gr_ gr_24 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace\" id=\"24\" data-gr-id=\"24\">stl<\/g> file to be <g class=\"gr_ gr_25 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar multiReplace\" id=\"25\" data-gr-id=\"25\">rapid<\/g> prototyped under the column &#8220;File Name.&#8221;<\/li><li><strong>No <\/strong>files will be accepted or reviewed without a completed \u201cStudent RP Request Form\u201d. <strong>All filenames<\/strong> must follow naming instructions (keep names as short as possible)<\/li><li>Bring your <g class=\"gr_ gr_23 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling\" id=\"23\" data-gr-id=\"23\">stl<\/g> files and completed form on disc or flash drive to the model shop (11th Floor Taubman Building).<\/li><li>All Files must be stitched and <g class=\"gr_ gr_18 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del\" id=\"18\" data-gr-id=\"18\">water tight<\/g>.<\/li><li>Rapid Prototype machines will only accept files saved <g class=\"gr_ gr_22 gr-alert gr_gramm gr_inline_cards gr_run_anim Style multiReplace\" id=\"22\" data-gr-id=\"22\">in .<\/g>STL FORMAT.<br> (stereolithography)<\/li><li><strong>One .stl part per file only<\/strong>. Do not put multiple parts in one part file.<\/li><\/ol>\n\n\n\n<p class=\"redText\"> <strong>All *** .stl files must contain the <\/strong><strong class=\"\">student&#8217;s<\/strong><strong> full name, how many and located within a folder on the disc or flash drive to be accepted for rapid prototyping. After full student name, <\/strong><strong class=\"\"><g class=\"gr_ gr_5 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar multiReplace\" id=\"5\" data-gr-id=\"5\">keep<\/g><\/strong><strong> the file name as short as possible! The shop will not look at your files unless this format is followed!<\/strong><\/p>\n\n\n\n<p> File structure\/name conventions \u2013 example for submitting rapid prototype file.<\/p>\n\n\n\n<p><strong> Must<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\"><li> Create Folder zse student\u2019s first and last name only.<\/li><li> Create STL file(s) John-Doe-<g class=\"gr_ gr_11 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling\" id=\"11\" data-gr-id=\"11\">frt<\/g>&#8211;<g class=\"gr_ gr_9 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace\" id=\"9\" data-gr-id=\"9\">whl<\/g>-(how many: 1pc, 2pc, etc.) .stl<\/li><li> Stl. files must be saved in <g class=\"gr_ gr_7 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar only-ins doubleReplace replaceWithoutSep\" id=\"7\" data-gr-id=\"7\">created<\/g> folder as stated.<\/li><li> Include current RP Reqzuest Form in <g class=\"gr_ gr_3 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar only-ins doubleReplace replaceWithoutSep\" id=\"3\" data-gr-id=\"3\">folder<\/g>.<br> <\/li><\/ul>\n\n\n\n<h3 class=\"wp-block-heading\"> Example of format for submitting files to be rapid prototyped<\/h3>\n\n\n\n<div class=\"wp-block-image\"><figure class=\"alignleft is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-content\/uploads\/sites\/27\/2019\/08\/image.png\" alt=\"\" class=\"wp-image-128\" width=\"108\" height=\"104\"\/><\/figure><\/div>\n\n\n\n<p> Create a folder with <strong>your name only!<\/strong><\/p>\n\n\n\n<p> Everything you are submitting goes into this folder.<\/p>\n\n\n\n<p> Add your name to the RP Request form in place of Student (see below) do not change or shorten file name. You must get a new form for each semester with <g class=\"gr_ gr_5 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar only-ins replaceWithoutSep\" id=\"5\" data-gr-id=\"5\">correct<\/g> semester date.<\/p>\n\n\n\n<div class=\"wp-block-image\"><figure class=\"aligncenter is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-content\/uploads\/sites\/27\/2019\/08\/image-1.png\" alt=\"\" class=\"wp-image-130\" width=\"594\" height=\"137\"\/><\/figure><\/div>\n\n\n\n<p> Your form should look like this, fill out the form and save into folder. You must have your name and contact information. Use only <g class=\"gr_ gr_7 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar only-ins replaceWithoutSep\" id=\"7\" data-gr-id=\"7\">first<\/g> page of <g class=\"gr_ gr_6 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar only-ins replaceWithoutSep\" id=\"6\" data-gr-id=\"6\">form<\/g>.<\/p>\n\n\n\n<p><\/p>\n\n\n\n<figure class=\"wp-block-image is-resized\"><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-content\/uploads\/sites\/27\/2019\/08\/image-2.png\" alt=\"\" class=\"wp-image-132\" width=\"898\" height=\"430\" srcset=\"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-content\/uploads\/sites\/27\/2019\/08\/image-2.png 898w, https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-content\/uploads\/sites\/27\/2019\/08\/image-2-300x144.png 300w, https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-content\/uploads\/sites\/27\/2019\/08\/image-2-768x368.png 768w\" sizes=\"auto, (max-width: 709px) 85vw, (max-width: 909px) 67vw, (max-width: 1362px) 62vw, 840px\" \/><\/figure>\n\n\n\n<p><br><\/p>\n\n\n\n<h2 class=\"wp-block-heading\"> Tips for Building Files<\/h2>\n\n\n\n<ol class=\"wp-block-list\"><li>Build all files to theoretical unless you are confident in your <g class=\"gr_ gr_43 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling multiReplace\" id=\"43\" data-gr-id=\"43\">modeling<\/g> skills.<br> Poor surface development from incorporating fillets and radiuses are the<br> main cause for gaps when attempting to stitch files.<\/li><li>When creating files (parts that will be assembled) remember to include design clearances. If you create your files line for line they will not fit together. For items that will require painting about .010-.012\u201d per side should be sufficient. If pieces will be assembled with light sanding only approximately .005-.008\u201d design clearance will be required.<\/li><li>When using any of the printers, .060\u201d\/1.5mm is the thinnest cross-section recommended if priming and painting are required. The size of the part being created is directly related to wall thickness. Be sure that the integrity of the part will not be affected by thin cross-sections supporting heavier areas<\/li><li>Build sizes for each machine are as follows:<ul><li> Plastic Machine 1 10\u201d x 10\u201d x 12\u201d<\/li><li> Plastic Machine 2 10\u201d x 10\u201d x 12\u201d<\/li><li> <g class=\"gr_ gr_65 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace\" id=\"65\" data-gr-id=\"65\">Objet<\/g> Machine 13.5\u201d x 13.5\u201d x 8\u201d<br> If your part does not fit completely with clearance (4mm) within any of these working envelops it must be split up into smaller pieces which can be glued together later. When splitting parts try to provide split lines with maximum surface area to provide good glue surfaces.<\/li><\/ul><\/li><li>When creating part geometry small details will be filled during painting. (Lettering) Design these areas\/letters to allow for paint buildup to maintain the desired finished appearance. In other words, make them deeper or bigger.<\/li><li>All extra geometry must be removed (double surfaces and construction geometry blanked entities).<\/li><li>Some parts may have a large cross-section because of size. The FDM printers can create a semi-hollow interior which reduces the cost and weight of a large part. If the Objet printer is used it cannot create this type of part interior. The best way to reduce cost and weight is to design the part if possible using a surface offset and an access hole which will enable you to clean out most of the support material from inside the part.<\/li><li><strong>We do not mirror, scale or fix major part problems this is your responsibility. Remember one part per file.<\/strong><\/li><li><strong>Make sure your part is the correct scale!<\/strong><\/li><\/ol>\n\n\n\n<h2 class=\"wp-block-heading\"> Finishing of Rapid Prototype Parts<\/h2>\n\n\n\n<ol class=\"wp-block-list\"><li>In <g class=\"gr_ gr_3 gr-alert gr_gramm gr_inline_cards gr_disable_anim_appear Punctuation only-ins replaceWithoutSep\" id=\"3\" data-gr-id=\"3\">general<\/g> parts can be sanded with 100-240 grit sandpaper prior to typical priming.<\/li><li>Parts created in the Objet printer will need to be cleaned of any leftover support material and surface residue before priming or painting. The procedure for this is to clean all surfaces with the power washer, then alcohol and a stiff brush or cloth depending on how fragile the part. After this <g class=\"gr_ gr_10 gr-alert gr_gramm gr_inline_cards gr_run_anim Punctuation only-ins replaceWithoutSep\" id=\"10\" data-gr-id=\"10\">step<\/g> a light sanding with 120 grit sandpaper is normally all that is required to prep surfaces for priming.<\/li><li>Parts created in the FDM printers will require sanding with 100 grit sandpaper prior to priming.<\/li><li>Normally at least two coats of primer and sanding in between coats will be required to provide a good surface finish for painting.<\/li><\/ol>\n","protected":false},"excerpt":{"rendered":"<p>FORM INSTRUCTIONS: Download the latest &#8220;Student RP Request Form&#8220;. This form has two sheets the 1st sheet labeled \u201cStudent Request\u201d is for each student to complete (Do not fill out the second Page \u201cCCS Staff Only\u201d, this is for internal use only.) Fill out course and contact information. List each stl file to be rapid &hellip; <a href=\"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/model-shop\/submitting-files-for-rapid-prototyping\/\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;File Preparation for Rapid Prototyping&#8221;<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"parent":14,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"advgb_blocks_editor_width":"","advgb_blocks_columns_visual_guide":"","footnotes":""},"class_list":["post-124","page","type-page","status-publish","hentry"],"coauthors":[],"author_meta":{"author_link":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/author\/sevans\/","display_name":"Sean Evans"},"relative_dates":{"created":"Posted 7 years ago","modified":"Updated 4 years ago"},"absolute_dates":{"created":"Posted on August 20, 2019","modified":"Updated on November 9, 2021"},"absolute_dates_time":{"created":"Posted on August 20, 2019 3:34 pm","modified":"Updated on November 9, 2021 2:19 pm"},"featured_img_caption":"","featured_img":false,"series_order":"","_links":{"self":[{"href":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-json\/wp\/v2\/pages\/124","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-json\/wp\/v2\/comments?post=124"}],"version-history":[{"count":20,"href":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-json\/wp\/v2\/pages\/124\/revisions"}],"predecessor-version":[{"id":361,"href":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-json\/wp\/v2\/pages\/124\/revisions\/361"}],"up":[{"embeddable":true,"href":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-json\/wp\/v2\/pages\/14"}],"wp:attachment":[{"href":"https:\/\/campus.collegeforcreativestudies.edu\/academic-facilities\/wp-json\/wp\/v2\/media?parent=124"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}